Vane separator

• Vertical separator: it is used for the application of liquid drop removal and the working condition of small floor area.    

  Horizontal separator: used to handle high flow rate and large liquid drop

  Economical separator: it is suitable for working conditions with space limitation on space and pipeline.

   

  Product characteristics:

  Non standard design
  Large capacity blade
  Excellent performance
  ASME International Standard manufacturing

  
   

  Product application:

  Gas transmission and metering
  Fuel gas regulation
  Oil mist removal
  chemical plant
  Ammonia and urea plant
  Desiccant bed protection
  Molecular sieve protection
  Single cylinder gas separator
  Efficient liquid removal
  Wide range of liquid handling operations, including droplets
  Extremely high gas handling capacity
  Can be customized for three-phase air flow
  Enough space for pollution
  Features:
  These separators are designed to provide efficient liquid removal with high gas flow capacity. They can effectively deal with large liquid plugs and are easy to be used in three-phase separation.
   

  Working principle:

  • the gas and liquid entering the container are divided through the inlet baffle to remove large drops and free liquid.
  • the liquid falls to the bottom of the container through the stilling water plate and enters the first storage tank.
  • gas and remaining water mist into vane separator
  • the remaining liquid collected at the bottom of the blade set is discharged by the water pipe.
  • the sunken sewer and seal structure form the best drainage way.
  • drain and level control to ensure proper liquid discharge from the container.
   

   

  

   High efficiency liquid drop removal without liquid entrainment in double drum separator

   

  Working principle:

   

  (a) the gas and liquid entering the container are separated by the inlet baffle to remove large drops and free water mist
  (b) the liquid flows into the liquid storage chamber through the first lower blowdown pipe.
  (c) clean gas and residual water mist enter the vane separator.
  (d) the remaining liquid drops collected at the bottom of the discharge port of the vane demister enter the liquid storage chamber through the second blowdown pipe.
  (e) liquid level gauge can be set in the liquid storage chamber of collecting two blowdown pipes.

   

  

   

  Product characteristics

   

  The double drum separator is designed to provide efficient liquid removal. In addition, they can achieve higher gas flow capacity through longitudinal arrangement. A separating element is arranged in the upper cylinder, and the lower cylinder takes away the separated liquid. The gas flows from the upper cylinder to eliminate re entrainment. In addition, the lower cylinder acts as a retention chamber, providing a residence time for the bubbles to separate from the liquid.
  
  Vertical gas separator function
  Efficient removal of liquid from air flow
  Large scope of work
  Effective liquid removal rate
  Minimum floor area
  High and low liquid: gas compatibility
  Improved form for existing vertical separator
   

  Product characteristics

   

  Special vertical gas separator designed to handle high and low liquid to gas ratio. They are especially suitable for applications where heavy liquid entrainment causes water mist problems. Special proprietary equipment provides a smaller container configuration than mesh pads or other separation devices.

   

  Working principle

   

  (a) the gas and liquid entering the container are separated by the inlet baffle to remove large liquid drops and free liquid.
  (b) gas and residual mist enter the vane separator.
  (c) the separated droplets are collected at the bottom of the blade.
  (d) submerged drains drain the liquid to the bottom of the container.
  (e) the level gauge controls and monitors the amount of liquid collected in order to properly drain the liquid from the container.

   

• Data processing...